Mon-Thu: 09:00 – 17:00 | Fri: 09:00 – 13:00

All Prices Include VAT

phone_in_talk 020 8037 9300

“From start to finish the service was very good. Swift replies and prompt delivery.”

Christine L.
Shop Now
A Step-by-Step Guide On How To Install Vinyl Flooring Blog Featured Image

A Step-by-Step Guide On How To Install Vinyl Flooring

If you are installing new flooring in your home, you want something that will last. Vinyl flooring is a great option for flooring because it is affordable, it is water-resistant, and wears well!

Do you want to learn more about how to install vinyl flooring and other tips for installing vinyl flooring? Keep reading our step-by-step guide on how you can do this!

Measure Your Room

The most important part of installing vinyl flooring is to measure your room. Preparation is key to getting your measurements right and making your project easier.

Measuring your room will also help you know how much material you will need to complete your project. When measuring for vinyl flooring installation, you will want to know how big your room is in square meters.

Get the Right Tools and Materials

After you have measured your room, you want to make sure you have all the right materials and tools. These tools will also depend on what type of vinyl flooring you are using. For example, if you are installing sheet vinyl, you will need more materials than if you are installing vinyl flooring adhesives.

If you are installing vinyl, also known as cushion flooring or linoleum flooring, you will often need a putty knife, a notched trowel, a hand roller, a utility knife, adhesive material, and your roll of vinyl flooring.

Prepare Your Room

Once you have measured your room and you have your materials, you need to prepare the room and the floor.

The first thing you should do is take out any of the furniture in the room. This may even include the doors! If your new vinyl flooring will be raised, you need to take the doors off the hinges so you can properly lay your vinyl flooring.

Next, you may also need to remove baseboards and any other trim that will get in the way of your vinyl flooring installation. This will allow you to install the new flooring right up against the wall and won’t leave any gaps.

Prepare the Floors

To prepare your floors, there are many things you need to do. Depending on the material of your existing floor, you may need to remove the flooring. If you have concrete, vinyl, or linoleum floors, you can lay vinyl over the top.

If you do this, you want to make sure the existing floor is clean, smooth, and free of any cracks, holes, or other damage. If you have carpet, this will need to be removed before you install your vinyl flooring.

Either way, you want to make sure your existing floor is clean and free of debris before you lay your vinyl flooring.

Create Your Paper Template

Something that isn’t required when laying vinyl sheet flooring is to create a paper template for your room. However, this is a helpful step to take and it will ensure that your vinyl flooring fits perfectly.

If you use a large roll of craft paper, you can easily sketch the areas where you will need to trim your vinyl to fit. This is especially important if your room has exposed pipes or permanent fixtures that you need to work around.

Cut Your Vinyl Flooring

The next step to take to install vinyl flooring is to cut it to size. It is best to cut your vinyl a bit bigger than your room. This way, you can trim it to size and have an exact fit for your room.

If you have extra vinyl, you can always save this for smaller projects in the future! Vinyl is a great option for laundry rooms and even small bathrooms!

Lay Out The Material

Next, you will need to lay out your roll of vinyl flooring to make sure it will fit properly.

When it is in the final position, you can go ahead and make cuts to get a perfect fit. This is when it is time to trim the edges, and most importantly, the corners.

If you are working with inside corners, you can cut half-circles off of your vinyl until it fits well. For outside corners, you can make straight cuts.

Use Your Adhesive Material

The next step is to spread out your adhesive material. If you only are doing a perimeter adhesion, you can simply spread the material with a trowel along the wall. Make sure you spread the adhesive at least 6 inches wide to ensure a solid adhesion.

Generally, you should wait several hours for your vinyl floor glue to dry before you replace your furniture.

Roll Your Floor To Ensure Complete Adhesion

The last step to complete your vinyl flooring installation is to make sure your vinyl flooring is completely stuck to the floor with the adhesive.

This is done by using a hand roller or even a block of wood. Simply roll your tool over the installed vinyl flooring while applying good pressure. This will ensure that your flooring is completely stuck to the floor beneath.

How To Install Vinyl Flooring: Buy Material From a Reliable Company

If you know how to install vinyl flooring and are ready to start the process of replacing your floors, vinyl flooring is a great option! However, you want to be sure that you are buying your products from a reliable company.

If you are looking for vinyl sheet flooring, Buy Flooring Online can help! Our store offers all major brands and everything you need to replace your flooring. Contact our team today to learn more about the vinyl flooring installation process!