F Ball – F1 (5ltr) Styccobond Rubber Latex Adhesive
STYCCOBOND F1 is a natural rubber latex-based product designed for use as a seaming and sealing adhesive for carpets. Its creamy consistency makes it suitable for application with a brush or applicator.
STYCCOBOND F1 is for use with a suitable joining tape for seaming traditional and hessian-backed carpets and for sealing edges of traditional carpets to prevent fibre loss.
Product Specifications & Key Features:
- Appearance: Liquid
- Colour: White
- Open Time: 20 minutes
Seaming of carpets: Ensure that both edges are cut cleanly and are free from loose fibres, dirt, grease etc. Apply an even coat of adhesive to the back of the carpet and the surface of the joining tape. Allow to partially dry before pressing the surfaces firmly together, using a hand roller.
Edge sealing of traditional carpets: Remove any loose fibres, then apply adhesives to the edge of the carpet using a brush. Allow to dry before the carpet is stretched over the grippers.
For any areas under question please consult the F Ball Technical team.
Do not stretch the carpet until the adhesive has fully dried, premature stretching of the carpet will result in the seams opening up.
Brush, or suitable applicator for applying a bead of adhesive. Tools should be cleaned with water while the adhesive is still wet and with STYCCOCLEAN SOLVENT or STYCCOCLEAN C141 if allowed to dry.
Store between 5°C and 30°C. Protect from frost
12 months in unopened containers and stored under good conditions.